Messages: 1606 Location: Clearwater, FL
Registered: December 2003
Re: Help on blade size of screwdriver.
Tue, 03 January 2017 19:43
Make sure the width of the blade is the same width as the screw, also the bottom of the blade should reach the bottom of the slot of the screw while both blade edges touch the edges of the slots. This will require some finishing of the screwdriver blade or you risk dog earing the screw....which would be bad on breitling bezel screws. Keep in mind, these screws are generally pretty soft.
You're so unhip it's amazing your bum doesn't fall off!
